Fieldpiece HG2 - HVAC Guide System Analyzer Manual de usuario Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 37
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
50
WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.F
I
I
ELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.COM WWW.FIELDPIECE.C
O
Advanced Operations
Time
e internal clock is the basis for the time stamps
saved with test data.  e time cannot be altered once
data is taken; therefore, setting up the time before tak-
ing data is important to maintain records in the correct
order.  e TIME is shown on the bottom of the LCD on
most INPUT FORMs.
Rotate the dial to the TIME switch position.
Press RIGHT arrow to change time if needed.
LEFT and RIGHT arrows cycle through month,
day, year, military clock, and minutes.
UP and DOWN arrows adjusts.
Press ENTER to set time.
Memory (MEM)
From the Memory switch position you can delete a
single test, entire customer  le or all data. You can also
check your version of  rmware to see if you are up to
date and your memory status, to see how much memory
you have le . You can also communicate with the PC
and transfer data to and from with the “Com with PC”
option. See page 56 for more details.
Figure 22. Screenshot of Memory (MEM) switch.
Units
On every INPUT FORM there is a “Units” line.  e
default is English units. Metric units can be used by
pressing the RIGHT arrow when “Units” is highlighted.
Scroll Up or DOWN to toggle between English and
Metric units. Press ENTER to lock in your selection.  e
HVAC Guide
TM
tester will convert any measurements
you have taken when units are changed mid test.
CUSTOMER ID
On every INPUT FORM there is a Customer ID
line used for record keeping and long-term customer
tracking. Press ENTER when “CUSTOMER ID” is high-
lighted to select a previously saved Customer ID.
To enter a new (unsaved) Customer ID, press the
RIGHT arrow when “CUSTOMER ID” is highlighted.
Now adjust the value character-by-character using the
UP/DOWN arrows and the RIGHT arrow. When  n-
ished press ENTER to input the new Customer ID.
Figure 23. Selecting a previously saved Customer ID.
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 36 37

Comentarios a estos manuales

Sin comentarios